15-17 Mustang 5.0L Crate Motor ALUMINATOR Supercharged FORD Performance
Geachte klant,Indien er geen prijs/levertermijn weergegeven staat of u het artikel dat u zoekt niet kan vinden kan u dit steeds opvragen.
Dit kan u doen doorhier te klikken.
Coyote Gen 2 Aluminator Cast Aluminum 302Ci (5.0L) Crate Engine.
Put the latest and most technically advanced Ford engine in your ride.
Fits 2015-2017 Mustang GT
Ford Performance Parts 5.0L Coyote Aluminator SC long block crate engines deliver big power! These modern 5.0L 32-valve DOHC V8s utilize advanced features like Ti-VCT--Twin Independent Variable Camshaft Timing. And, unlike the factory engine, the "Aluminator" is built with low-compression forged pistons and H-beam connecting rods to meet the demands of forced induction.
Ford Performance Parts 5.0L Coyote Aluminator SC long block crate engines feature:
* 5.0L (302 cu. in.)
* 9.5:1 compression ratio for supercharged applications (nominal)
* Hard-anodized forged pistons
* H-beam connecting rods
* Forged steel crankshaft
* Uses production Mustang GT aluminum cylinder block
* Large rear sump oil pan with 8 qt. capacity features optimized oil drainback and windage tray to control oil and improve high-rpm performance
* Tuned composite Mustang GT intake manifold with production drive-by-wire 80mm throttle body variable runner control
* 4-valve-per-cylinder aluminum heads with roller-finger followers to reduce friction
* Boss 302 valve springs
* Mustang GT production camshafts
* Ford Performance Parts engine cover kit
* Manual transmission engine injector harness
* Front cover is modified for Ford Performance Parts supercharger kits
* Colder, heat range zero (0) spark plugs for supercharging
* Ford Performance Parts oil filter
* Billet steel gerotor oil pump
* Vehicle harness and PCM not included; Ford Performance wiring, PCM, and installation kit recommended for street rod/project car installation
* Does not include alternator
* Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines
* NOTE: Due to 9.5:1 compression ratio, custom tuning is required for optimum performance
* 5.0L Mustang engine cover kit
* Does not include exhaust manifolds
NOTE: Due to 9.5:1 compression ratio, custom tuning is required for optimum performance. Includes Ford Performance 5.0L Mustang engine cover kit - M-9680-M50A.
Note: In order for low oil sensor to function in 2015-2016 Mustang, re-use existing oil pan or replace with BR3Z-6675-A pan, available at any Ford dealer.